A Closer Look At How Bar Bending Machines Work

If you really start to pay attention, you will notice that there are bent metal bars just about everywhere that you look. From furniture legs to rebar used in the construction industry, there are countless different applications where heavy-duty bars need to be bent into precise shapes.

In the past, this was done using hand tools. As you might guess, the process was not only extremely time-consuming but it also required a tremendous amount of physical effort.

bar-bending-machine

These days, the process has been made far easier thanks to the introduction of bar bending machines. These machines are designed to bend bars in varying widths to just about any shape that you can imagine. Although all of these machines are unique in terms of the types of applications that they are designed for, the basic concept behind how they work is similar.

In essence, a metal bar is inserted between two bushes or pins that are attached to a rotating plate. The operator then turns the machine on, causing the plate to rotate. As it does, the bushes press up against the bar and cause it to bend.

The rotating plates on these machines have a series of holes in them that allow the operator to move the bushes around into different configurations so that they can make different types of bends. Additionally, bushes can be purchased in varying heights so that you can use the machine to bend bars of different thicknesses. For instance, if you were bending thin rebar, you could get by with extremely short bushes. On the other hand, if you were bending thick rebar or wanted to bend more than one piece of metal at a time, you could get thicker bushes instead, providing the height that you needed to accommodate the additional thickness of the metal.

Most of these machines are operated by electricity. Some use a series of buttons and hand-operated switches whereas others use foot pedals. Foot pedals tend to be a good option since they leave the operator’s hands free to maneuver the metal bars through the machine.

In some cases, these machines are also completely automated, requiring no assistance from a human operator. For instance, factories that perform the same types of bends over and over again may use a machine that is designed to feed long pieces of rebar through automatically. At the opposite end of the machine, a bending plate quickly rotates, making multiple bends in the piece of steel rebar. When the bends are complete, a cutting bar comes out and cuts the piece that was just bent off, dropping it into a waiting bin. This process can be repeated over and over again very quickly, making it possible to mass produce precisely bent pieces of metal.

bar-bender-machine

Hopefully, this helps you get a better understanding of how metal bar bending machines http://ellsenrebarprocessingmachine.com/bar-bender-machine/ work. These machines have revolutionized the process of bending metal bars into just about any shape that you can imagine, opening up a world of possibilities in terms of construction and design. Using a machine to bend the metal offers a level of precision that is practically impossible to duplicate by hand. Ellsen offers the best quality bar bender machine. Click here to know more http://ellsenrebarprocessingmachine.com/.